Sun Fire280R です。UltraSPARC-III+ 1.2GHz x2
Memory 8GB
HDD 68GB x 2
XVR-100
イーサネット　x 3

動作品ですがパワーサプライ一つに警告がありますのでジャンクとしてください。
RSCがついているのでリモートから電源を入れたり
監視が出来ます。
リモートデスクトップをインストールしてあるので
VNCを使ってリモート接続も出来ます。
本体とキーボードのみです。
インストールメディアはご希望の方にダウンロードした
ファイルをつけます。
Solaris10 です。SunstudioとNetBean、
SunSuite8がインストールしてあります。
詳しく分かる方お願いいたします。
3ボタンマウス、電源ケーブルもついてます。

（2024年 11月 16日 19時 40分 追加）
RSC Alert: Host System has Reset

RSC Alert: Power Supply 1 Failure.


Setting diag-switch? to true because of RSC command.

@(#)OBP 4.5.21 2003/02/24 17:23 Sun Fire 280R
BBC AID Register 0000.0000.0000.0000
Power-On Reset
Executing Power On SelfTest

0>@(#) Excalibur POST 4.7.4 2002/12/23 17:04
ated (firmware_re) taff/firmware_re/post/post-build-4.7.4/Camelot/excal/integr
0>Jump from OBP->POST.
0>CPUs present in system: 0 1
0>diag-switch? configuration variable set TRUE.
0>Diag level set to MIN.
0>MFG scrpt mode set to NONE
0>I/O port set to RSC.
0>Done with First Init, reset system.
0>Current CPU frequency is 400 MHz.
0> Resetting to 1200
0>Clock Synth Reset.
0>
0>Start selftest...
0>Init CPU
0> Cheetah_plus Version 11.0
0>DMMU Registers Access
0>DMMU TLB DATA RAM Access
0>DMMU TLB TAGS Access
0>IMMU Registers Access
0>IMMU TLB DATA RAM Access
0>IMMU TLB TAGS Access
0>Probe Ecache
0> Size = 00000000.00800000...
0>Ecache Data Bitwalk
0>Ecache Address Bitwalk
0>Scrub and Setup Ecache
0>Setup and Enable DMMU
0>Setup DMMU Miss Handler
0>Test and Init Temp Mailbox
1>Init CPU
1> Cheetah_plus Version 11.0
1>DMMU Registers Access
1>DMMU TLB DATA RAM Access
1>DMMU TLB TAGS Access
1>IMMU Registers Access
1>IMMU TLB DATA RAM Access
1>IMMU TLB TAGS Access
1>Probe Ecache
1> Size = 00000000.00800000...
1>Ecache Data Bitwalk
1>Ecache Address Bitwalk
1>Scrub and Setup Ecache
1>Setup and Enable DMMU
1>Setup DMMU Miss Handler
1>Test and Init Temp Mailbox
0>Initializing Scan Database
0>BBC: 1483203b
0>SCSI: 15060045
0>ICHIP: 0d1e203b
0>RIO: 13e5d03b
0>IO-Bridge: 307be06d
0>CPMS0: 1142903b
0>CPMS1: 1142903b
0>CPMS2: 1142903b
0>CPMS3: 1142903b
0>CPMS4: 1142903b
0>CPMS5: 1142903b
0>Init I2C
0>Unquiesce Safari
0>Blast Fans
0>Set Trip Temp CPU 0 to 110C
0>Set Trip Temp CPU 1 to 110C
0>SAT NOV 16 6:58:42 GMT 24
0>Safari quick check
0> to IO-bridge_0
0>Safari full check
0> to IO-bridge_0
0>Probe and Setup Memory
0>INFO: 2048MB Bank 0
0>INFO: 2048MB Bank 1
0>INFO: 2048MB Bank 2
0>INFO: 2048MB Bank 3
0>
0>Data Bitwalk on Master
0> Test Bank 0.
0> Test Bank 1.
0> Test Bank 2.
0> Test Bank 3.
0>Address Bitwalk on Master
00.NFO: Addr walk mem test on CPU 0 Bank 0: 00000000.00000000 to 00000000.800000
00.NFO: Addr walk mem test on CPU 0 Bank 1: 00000001.00000000 to 00000001.800000
00.NFO: Addr walk mem test on CPU 0 Bank 2: 00000002.00000000 to 00000002.800000
00.NFO: Addr walk mem test on CPU 0 Bank 3: 00000003.00000000 to 00000003.800000
0>Set Mailbox
0>Setup Final DMMU Entries
0>Post Image Region Scrub
0>Run POST from Memory
0>Verifying checksum on copied image.
0>The Memory's CHECKSUM value is 2844.
0>The Memory's Content Size value is 8faa2.
0>Success... Checksum on Memory Validated.
0>Safari quick check
0> to IO-bridge_0
0>Safari full check
0> to IO-bridge_0
1>Safari quick check
1> to IO-bridge_0
1>Safari full check
1> to IO-bridge_0
1>Probe and Setup Memory
1>INFO: No memory on cpu 1
1>Set Mailbox
1>Data Bitwalk on mem
1> Test Bank 0.
1> Test Bank 1.
1> Test Bank 2.
1> Test Bank 3.
1>Setup Final DMMU Entries
1>Map Slave POST to master memory
1>Print Mem Config
1>Caches : Icache is ON, Dcache is ON, Wcache is OFF, Pcache is ON.
0>Print Mem Config
0>Caches : Icache is ON, Dcache is ON, Wcache is OFF, Pcache is ON.
0>Memory in non-interleave config:
0> Bank 0 2048MB : 00000000.00000000 -> 00000000.80000000.
0> Bank 1 2048MB : 00000001.00000000 -> 00000001.80000000.
0> Bank 2 2048MB : 00000002.00000000 -> 00000002.80000000.
0> Bank 3 2048MB : 00000003.00000000 -> 00000003.80000000.
0>Scrub Memory
0>Quick Block Mem Test
0>Quick Test 16777216 bytes at 00000000.00600000
0>40% Done...
1>Flush Caches
0>Flush Caches
0>IO-Bridge unit 0 init test
0>IO-Bridge unit 0 reg test
0>IO-Bridge unit 0 mem test
0>IO-Bridge unit 0 PCI DMA A test
0>IO-Bridge unit 0 PCI DMA B test
0>IO-Bridge unit 0 PCI merg test
0>IO-Bridge unit 0 PCI iommu test
0>IO-Bridge unit 0 PCI stc test
0>IO-Bridge unit 0 interrupt test
1>IO-Bridge unit 0 init test
1>IO-Bridge unit 0 interrupt test
1>FPU Registers and Data Path
0>FPU Registers and Data Path
1>FPU Move Registers
0>FPU Move Registers
1>FSR Read/Write
0>FSR Read/Write
1>FPU Branch Instructions
0>FPU Branch Instructions
1>FPU Functional Test
0>FPU Functional Test
1>FPU BLOCK REG TEST
0>FPU BLOCK REG TEST
0>
0>Turn IO-Bridge 0 errors on
0>Turn error traps on
0>INFO:
0> POST Passed all devices.
0>POST: Return to OBP.
1>Return to OBP, PASS
0>Return to OBP, PASS

RSC Alert: Host System has Reset


Setting diag-switch? to true because of RSC command.

@(#)OBP 4.5.21 2003/02/24 17:23 Sun Fire 280R
BBC AID Register 0000.0000.0000.0000
POST Results: Cpu 0
%o0 0000.0000.0000.0000
%o1 0000.0000.0000.0000
%o2 0000.0000.0000.0000
POST Results: Cpu 1
%o0 0000.0000.0000.0000
%o1 0000.0000.0000.0000
%o2 0000.0000.0000.0000
CPU seeprom format: 0000.0000.0000.0002
Membase: 0000.0000.0000.0000
MemSize: 0000.0000.0010.0000
Clearing TLBs Done
Init CPU arrays Done
Init E$ tags Done
Setup TLB Done
MMUs ON
Copy Done
PC = 0000.07ff.f008.5970
PC = 0000.0000.0000.59e8
Decompressing Done
Size = 0000.0000.0006.fd20
ttya initialized
Start Reason: Initialize Machine
Configuring the machine:

RSC Alert: Host System has Reset



Setting diag-switch? to true because of RSC command.

@(#)OBP 4.5.21 2003/02/24 17:23 Sun Fire 280R
BBC AID Register 0000.0000.0000.0000
Loading Configuration
Membase: 0000.0000.0000.0000
MemSize: 0000.0002.0000.0000
Clearing TLBs Done
Init CPU arrays Done
Init E$ tags Done
Setup TLB Done
MMUs ON
Block Scrubbing Done
Copy Done
PC = 0000.07ff.f008.5970
PC = 0000.0000.0000.59e8
Decompressing Done
Size = 0000.0000.0006.fd20
ttya initialized
Start Reason: First start after Power On
System Reset: (SPOR) (PLL)
Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
memory-controller
Probing gptwo at 1,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
memory-controller
Probing gptwo at 8,0 pci pci
Loading Support Packages: kbd-translator
Loading onboard drivers: ebus flashprom bbc power i2c dimm-fru dimm-fru
dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru nvram idprom
i2c cpu-fru temperature cpu-fru temperature fan-control
motherboard-fru ioexp ioexp ioexp fcal-backplane
remote-system-console power-distribution-board power-supply
power-supply rscrtc beep rtc gpio pmc parallel rsc-control
rsc-console serial
CPU 0 set ambient power off temperature to 70 degrees C
CPU 0 set junction power off temperature to 110 degrees C
CPU 1 set ambient power off temperature to 70 degrees C
CPU 1 set junction power off temperature to 110 degrees C
t after Power On forced input/output devices to the RSC.Start Reason: First star
System Reset: (SPOR) (PLL)
Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
memory-controller
Probing gptwo at 1,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
memory-controller
Probing gptwo at 8,0 pci pci
Loading Support Packages: kbd-translator
Loading onboard drivers: ebus flashprom bbc power i2c dimm-fru dimm-fru
dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru dimm-fru nvram idprom
i2c cpu-fru temperature cpu-fru temperature fan-control
motherboard-fru ioexp ioexp ioexp fcal-backplane
remote-system-console power-distribution-board power-supply
power-supply rscrtc beep rtc gpio pmc parallel rsc-control
rsc-console serial
CPU 0 set ambient power off temperature to 70 degrees C
CPU 0 set junction power off temperature to 110 degrees C
CPU 1 set ambient power off temperature to 70 degrees C
CPU 1 set junction power off temperature to 110 degrees C
WARNING: RSC has forced input/output devices to the RSC.
Sun Fire 280R (2 X UltraSPARC-III+) , Keyboard Present
Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.5, 8192 MB memory installed, Serial #56329985.
Ethernet address 0:3:ba:5b:87:1, Host ID: 835b8701.




Resetting ...


RSC Alert: Host System has Reset